SUMMA-CHEM
EN
Request a Quote

Authorized distributor

voestalpine Böhler Welding Croatia — welding consumables and equipment

voestalpine Böhler Welding is the welding-consumables brand within the voestalpine group. The largest catalogue in our range: wires, electrodes, fluxes and special programmes, with data sheets on most products.

Open the catalogue Request a quote

Brand

What is voestalpine Böhler Welding?

The programme brings together several sub-brands: BÖHLER, Thermanit, UTP, Avesta, diamondspark, Marathon, CERAshape, 3Dprint AM, WearSpray, coldmelt and Record.

The same alloy name can exist in more than one commercial form — BÖHLER A 7 CN-IG is published both as a solid wire and as a TIG rod. Each form has its own page here, because the name alone is not the product.

Böhler is an Austrian industrial name with a long history in special steels; its welding consumables are made today within the voestalpine group — a leading European steel and metal-processing technology group headquartered in Austria. Applications run from power generation, petrochemicals and the process industry to repair welding and hardfacing.

At 1107 products this is the largest catalogue in our range: FOX stick electrodes, MIG/MAG and TIG wires and rods, diamondspark flux-cored wires, the high-alloy Thermanit programme, the UTP repair programme, Soudotape strip cladding, fluxes and metal powders, and 3Dprint AM wires for wire-arc additive manufacturing (WAAM). 997 products also carry the tables from their data sheets — composition, mechanical properties, diameters and approvals.

Website: www.voestalpine.com/welding/global-en/products

Programme

The voestalpine Böhler Welding programme by category

The complete published programme: 1107 voestalpine Böhler Welding products across these groups.

Welding Wires

Solid welding wire Solid wires for gas-shielded welding — from structural to high-alloyed steels. 174 products Gas-shielded flux-cored wire Cored wires welded under shielding gas — rutile, basic and metal-cored fills. 92 products Submerged arc wire Wires for submerged-arc welding (SAW) in vessel, pipe and structural fabrication. 86 products Metal-cored wire Metal-cored wires for high deposition and low spatter. 64 products WAAM wire Wires for wire-arc additive manufacturing (WAAM) — 3D printing of metal parts. 35 products Self-shielded flux-cored wire Self-shielded cored wires — welding without a gas cylinder, also outdoors. 17 products

Consumables

Stick electrode Covered electrodes for manual metal arc (MMA) welding — rutile, basic and special coatings. 207 products TIG rod Cut-length rods for TIG welding, for precise, clean joints. 120 products Wire/flux combination Tested wire–flux combinations for submerged-arc welding. 106 products Submerged arc flux Fluxes for submerged-arc welding, paired with their matching wires. 57 products Strip cladding Strips for cladding and surfacing — corrosion-resistant and hard layers. 35 products Electroslag flux Fluxes for electroslag strip cladding of large surfaces. 34 products Metal powder Metal powders for surfacing, spraying and additive processes. 27 products Ceramic weld backing Ceramic backings that form the root pass in one-sided welding. 9 products Arc spraying wire Wires for arc spraying of protective coatings — a coating process, not joining. 6 products

Equipment

Pulsed MIG/MAG welding machine Pulsed MIG/MAG systems for low spatter and heat-input control. 10 products MMA (stick) welding machine Inverter machines for stick (MMA) welding. 6 products TIG DC welding machine TIG DC machines for steels and stainless steels, for precise joints. 6 products MIG/MAG welding machine MIG/MAG power sources for production and maintenance. 5 products Multi-process welding machine Multiprocess machines — several welding processes in one power source. 5 products TIG AC/DC welding machine TIG AC/DC machines — with alternating current also for aluminium. 5 products Plasma cutting machine Plasma cutting machines for electrically conductive materials. 1 product

Partnership

voestalpine Böhler Welding through Summa-Chem

Summa-Chem is an authorized distributor of voestalpine Böhler Welding. We prepare a quotation on request for products from this catalogue. If you do not have the exact designation, describe the application and we will help you select.

  1. 1

    Send an enquiry

    State the product or application: classification (AWS/EN ISO), diameter, quantity and delivery location.

  2. 2

    We confirm the details

    We check availability and, if needed, suggest a suitable alternative from the voestalpine Böhler Welding programme.

  3. 3

    Quotation and delivery

    We send a quotation with price and lead time and organize delivery in Croatia and the region.

Consumables

Wires, electrodes and special programmes

The largest catalogue in our range: from solid wires and electrodes to hardfacing, strip cladding, metal powders and additive manufacturing. Every product lists its classifications, and most carry the manufacturer's data sheet.

Solid and cored wires

Solid wires, gas-shielded and self-shielded flux-cored wires and metal-cored wires — including the diamondspark programme.

Stick electrodes and TIG rods

Electrodes and rods for unalloyed, low-alloyed, stainless and high-alloyed steels, including the UTP repair and hardfacing programme.

SAW programme

Wires, fluxes and wire-flux combinations for submerged-arc welding, plus strips and fluxes for cladding.

Special programmes

Metal powders, wires for additive manufacturing (3Dprint AM), arc-spraying wires and ceramic weld backings.

Equipment

Welding machines

The equipment programme covers MMA, TIG and MIG/MAG machines, pulsed and multiprocess systems and plasma equipment. Technical specifications are tabled on each machine's page.

MMA and TIG machines

Stick inverters and TIG DC / AC-DC units.

MIG/MAG and pulsed systems

Compact and pulsed MIG/MAG power sources for production.

Multiprocess systems

Machines covering several processes in one power source.

Applications

Typical applications

  • Cryogenic and low-temperature stainless steel welding
  • Duplex stainless steel fabrication
  • High-strength steels matched to specific base materials
  • Hardfacing, build-up, crack repair and buffer layers
  • Thermal arc spraying for wear- and corrosion-resistant coatings — a coating process, not joining
  • Wire arc additive manufacturing (WAAM)
  • Strip cladding and electroslag surfacing
  • Ceramic weld backing for single-side welding

Standards

Classifications and standards

Products are classified to international standards such as AWS/ASME and EN ISO; the designations are listed on each product page, in their original form. For wires and rods the designations often include the material number (e.g. 1.4430), so the alloy is visible from the classification itself.

If you need a certificate or approval for a specific product, request it through an enquiry and we obtain it with the quotation.

Selection

How to choose a product: enquiry data

You get the fastest and most accurate quotation if your enquiry states:

  1. The product designation or classification (e.g. AWS or EN ISO)
  2. The base material you are welding
  3. Process (MMA, TIG, MIG/MAG, SAW…)
  4. Diameter and packaging (for wires and electrodes)
  5. For machines: mains supply (1Ph/3Ph) and current range
  6. Quantity
  7. Delivery location

Don't have all the data? Send what you know — we will help with the selection.

Request a quote

Documentation

Technical documentation

Nearly every product in this catalogue links to its data sheet on the manufacturer's pages — it opens directly from the Documentation section of the product page. For further documents, certificates or instructions, send an enquiry and we deliver them with the quotation.

Publications

www.voestalpine.com/welding/global-en/products

Catalogue

How to use the voestalpine Böhler Welding catalogue

The catalogue contains 1107 products. Search by name, designation or classification (e.g. AWS or EN ISO), filter by category and subcategory, and sort the results.

Each product page carries the classifications, the technical tables and the available versions, with an enquiry form pre-filled with the product data.

Open the full catalogue

Most popular categories:

Stick electrode Solid welding wire TIG rod Wire/flux combination

Why Summa-Chem

Why source voestalpine Böhler Welding through Summa-Chem

The complete published programme

voestalpine Böhler Welding consumables and equipment with technical data in one place, in six languages.

Help with selection

We identify the product by classification, application or existing material and suggest the right voestalpine Böhler Welding product.

A clear quotation

We prepare the quotation to your specification and quantity — we reply within 24 hours.

Regional delivery

We organize delivery in Croatia and the region with agreed lead times.

FAQ

Frequently asked questions about voestalpine Böhler Welding

Is Summa-Chem an authorized distributor of voestalpine Böhler Welding products?

Yes. Summa-Chem d.o.o. is an authorized distributor of the voestalpine Böhler Welding programme. Send an enquiry through the catalogue or the contact form and we will prepare a quotation.

What do names like BÖHLER, Thermanit, UTP or diamondspark mean?

They are sub-brands within the voestalpine Böhler Welding programme: BÖHLER and diamondspark for wires and electrodes, Thermanit and Avesta for stainless and high-alloyed materials, UTP for repair and hardfacing, Marathon for SAW fluxes, plus CERAshape, 3Dprint AM, WearSpray, coldmelt and Record. All are published in this catalogue.

Why does the same name appear both as a solid wire and as a TIG rod?

The same alloy often exists in several commercial forms — for instance as a solid wire and as a TIG rod. Each form has its own page with its own classifications, because it is ordered and classified separately.

Which product groups does the catalogue cover?

Welding wires (solid, flux-cored, metal-cored, SAW and WAAM wires), stick electrodes, TIG rods, wire-flux combinations, fluxes, cladding strips, metal powders, arc-spraying wires, ceramic backings and welding equipment.

How do I find the right product?

Search the catalogue by name or classification (e.g. AWS or EN ISO), or filter by category. If you have another manufacturer's designation, send it through an enquiry and we will propose the matching product from the programme.

Where is the technical data for a given product?

The product page lists the classifications and a description, and nearly every product links to the official data sheet with the full technical data — in the Documentation section.

Does the catalogue include products for additive manufacturing (WAAM)?

Yes — the 3Dprint AM programme covers wires for wire-arc additive manufacturing, with alloy designations and classifications on every product page.

Does the catalogue include welding machines?

Yes — the equipment programme covers MMA, TIG and MIG/MAG machines and pulsed and multiprocess systems, with technical specifications on each machine's page.

How do I order a specific diameter or packaging?

State the diameter, packaging and quantity in the enquiry form on the product page — the quotation is prepared for exactly that version.

Are prices and availability shown?

Prices are provided by quotation. Send the product designation and quantity and we reply with a quotation and lead time, normally within 24 hours.

Have another question? Contact us through the form below.

Contact

Request a quotation for voestalpine Böhler Welding products

Send an inquiry and we will come back with availability and a quotation.