SUMMA-CHEM
EN
Request a Quote

Authorized distributor

Oerlikon Welding Croatia — welding consumables and equipment

Oerlikon Welding is the welding brand within the Lincoln Electric group in Europe. In the catalogue: electrodes, wires, fluxes and the CITO equipment families, with technical data on every product.

Open the catalogue Request a quote

Brand

What is Oerlikon Welding?

The programme covers solid and flux-cored wires, TIG rods, stick electrodes, submerged arc wires and fluxes, ceramic backing and the CITOPULS, CITOSTEEL, CITOLINE, CITOMIG, CITOWAVE, CITOTIG, CITOARC, MINIARC and CITOCUT equipment families.

This is Oerlikon welding. It is not connected to the unrelated OC Oerlikon industrial group (surface solutions, polymer processing, additive manufacturing).

Oerlikon is a Swiss welding brand, named after the Zürich district it comes from. For decades it has been one of Europe's best-known names in stick electrodes and submerged-arc welding; today the programme is developed and manufactured within the Lincoln Electric group — keeping its own identity and its own product designations.

The catalogue counts 359 products: electrode lines such as SPEZIAL, TENAX and CITOREX, CARBOFIL MIG/MAG wires, INERTFIL TIG rods, FLUXOCORD submerged-arc combinations, and the CITOTIG and CITOPULS power sources. Technical products carry composition, mechanical properties, shielding gases to EN ISO 14175 and approvals.

Programme

The Oerlikon Welding programme by category

The complete published programme: 359 Oerlikon Welding products across these groups.

Welding Wires

Flux-cored wire Flux-cored wires for higher productivity and demanding applications. 52 products Solid welding wire Solid wires for gas-shielded MIG/MAG welding, on spools. 43 products Submerged arc wire Wires for submerged-arc welding (SAW) in vessel, pipe and structural fabrication. 40 products Metal-cored wire Metal-cored wires for high deposition and low spatter. 13 products

Consumables

Stick electrode Covered electrodes for manual metal arc (MMA) welding — rutile, basic and special coatings. 112 products TIG rod Cut-length rods for TIG welding, for precise, clean joints. 42 products Submerged arc flux Fluxes for submerged-arc welding, paired with their matching wires. 32 products Ceramic weld backing Ceramic backings that form the root pass in one-sided welding. 6 products

Equipment

MIG/MAG welding machine MIG/MAG power sources for production and maintenance. 5 products Pulsed MIG/MAG welding machine Pulsed MIG/MAG systems for low spatter and heat-input control. 5 products TIG DC welding machine TIG DC machines for steels and stainless steels, for precise joints. 5 products TIG AC/DC welding machine TIG AC/DC machines — with alternating current also for aluminium. 2 products MMA (stick) welding machine Inverter machines for stick (MMA) welding. 1 product Plasma cutting machine Plasma cutting machines for electrically conductive materials. 1 product

Partnership

Oerlikon Welding through Summa-Chem

Summa-Chem is an authorized distributor of Oerlikon Welding. We prepare a quotation on request for products from this catalogue. If you do not have the exact designation, describe the application and we will help you select.

  1. 1

    Send an enquiry

    State the product or application: classification (AWS/EN ISO), diameter, quantity and delivery location.

  2. 2

    We confirm the details

    We check availability and, if needed, suggest a suitable alternative from the Oerlikon Welding programme.

  3. 3

    Quotation and delivery

    We send a quotation with price and lead time and organize delivery in Croatia and the region.

Consumables

Electrodes, wires and fluxes

The consumables programme covers MMA, MIG/MAG, TIG and SAW welding. Every product lists its classifications (AWS, EN ISO), and — where the catalogue carries them — chemical composition, mechanical properties, welding currents, diameters and packaging.

Stick electrodes

The largest group of the programme: rutile, basic and special electrodes for structural, stainless and difficult-to-weld steels.

Solid and cored wires

CARBOFIL solid wires and FLUXOFIL / FLUXINOX cored wires, including self-shielded types for outdoor work.

TIG rods

The CARBOROD and INERTROD rod programme for TIG welding, with chemical composition on the product page.

SAW wires and fluxes

OE wires and OP fluxes for submerged-arc welding and electroslag strip cladding.

Equipment

Welding and cutting machines

The equipment programme is built around the CITOPULS, CITOTIG, CITOARC, CITOLINE and CITOSTEEL families — from MMA inverters to pulsed MIG/MAG systems — plus plasma cutting equipment. Technical specifications are tabled on each machine's page.

MIG/MAG and pulsed systems

CITOLINE, CITOSTEEL and pulsed CITOPULS power sources for production.

TIG machines

CITOTIG units for DC and AC/DC TIG welding.

MMA and plasma

CITOARC stick inverters and CITOCUT plasma cutting equipment.

Applications

Typical applications

  • Aluminium welding, 5XXX and 6XXX series base alloys
  • Galvanised and zinc-coated steel, robotic and semi-automatic welding
  • Duplex and austenitic stainless steel, resistance to intergranular corrosion
  • Stainless electroslag cladding
  • Outdoor site welding with self-shielded wire, without shielding gas
  • Plasma cutting

Standards

Classifications and standards

Products are classified to international standards such as AWS/ASME and EN ISO; the designations are listed on each product page, in their original form.

Individual products also list classification-society approvals (e.g. TÜV, DNV, ABS, LR, BV). Before procedure qualification, check the current certificates — we gladly obtain them through an enquiry.

Selection

How to choose a product: enquiry data

You get the fastest and most accurate quotation if your enquiry states:

  1. The product designation or classification (e.g. AWS or EN ISO)
  2. The base material you are welding
  3. Process (MMA, TIG, MIG/MAG, SAW…)
  4. Diameter and packaging (for wires and electrodes)
  5. For machines: mains supply (1Ph/3Ph) and current range
  6. Quantity
  7. Delivery location

Don't have all the data? Send what you know — we will help with the selection.

Request a quote

Documentation

Technical documentation

Each product page carries the technical tables: classifications, chemical composition, mechanical properties, welding currents and the versions with item numbers. If you need a data sheet, a certificate or further documentation for a specific product, request it through an enquiry and we deliver it with the quotation.

Product catalogue

Equipment

Catalogue

How to use the Oerlikon Welding catalogue

The catalogue contains 359 products. Search by name, designation or classification (e.g. AWS or EN ISO), filter by category and subcategory, and sort the results.

Each product page carries the classifications, the technical tables and the available versions, with an enquiry form pre-filled with the product data.

Open the full catalogue

Most popular categories:

Stick electrode Flux-cored wire Solid welding wire TIG rod

Why Summa-Chem

Why source Oerlikon Welding through Summa-Chem

The complete published programme

Oerlikon Welding consumables and equipment with technical data in one place, in six languages.

Help with selection

We identify the product by classification, application or existing material and suggest the right Oerlikon Welding product.

A clear quotation

We prepare the quotation to your specification and quantity — we reply within 24 hours.

Regional delivery

We organize delivery in Croatia and the region with agreed lead times.

FAQ

Frequently asked questions about Oerlikon Welding

Is Summa-Chem an authorized distributor of Oerlikon Welding products?

Yes. Summa-Chem d.o.o. is an authorized distributor of the Oerlikon Welding programme. Send an enquiry through the catalogue or the contact form and we will prepare a quotation.

Is Oerlikon Welding related to the OC Oerlikon group?

No. Oerlikon Welding is a welding brand that operates within the Lincoln Electric group in Europe. The OC Oerlikon industrial group (surface solutions, polymer processing) is not connected to this programme.

Which Oerlikon product groups does the catalogue cover?

Stick electrodes, solid and cored wires, TIG rods, SAW wires and fluxes, ceramic weld backings, and welding and plasma cutting equipment.

How do I find the right electrode or wire?

Search the catalogue by name or classification (e.g. AWS or EN ISO), or filter by category. If you have another manufacturer's designation, send it through an enquiry and we will propose the matching Oerlikon product.

Where can I see chemical composition and mechanical properties?

On the product page: alongside the classifications there are tables of chemical composition, mechanical properties with impact energies per temperature, welding currents, and shielding gases to EN ISO 14175 — wherever the catalogue carries them for that product.

Which Oerlikon machine families are in the catalogue?

CITOPULS and CITOWAVE pulsed MIG/MAG systems, CITOLINE and CITOSTEEL MIG/MAG power sources, CITOTIG TIG machines, CITOARC MMA inverters and CITOCUT plasma cutting equipment.

How do versions (diameters and packaging) work?

The product page has a versions table with item numbers, diameters, weights and packaging. The enquiry form lets you select a diameter so the quotation is prepared for exactly that.

Are prices and availability shown?

Prices are provided by quotation. Send the product designation and quantity and we reply with a quotation and lead time, normally within 24 hours.

Can I get a data sheet or certificate for a specific product?

Yes — name the product in your enquiry and we deliver the requested documents with the quotation.

Have another question? Contact us through the form below.

Contact

Request a quotation for Oerlikon Welding products

Send an inquiry and we will come back with availability and a quotation.