Classification: AlMg4,5Mn0,7(A) Al 5183
Aluminium · AlMg4,5Mn0,7(A) Al 5183
Price on request
Send an enquiry for this product. Tell us the diameter and quantity and we will prepare a quote.
Standards and classifications
| EN ISO 18273 (2004) | Al 5183 - AlMg4,5Mn0,7 (A) |
|---|---|
| AWS-A5.10 | ER 5183 |
Field of application
Joint welding of aluminium-magnesium alloys Welding of aluminium casting alloys
Manufacturer's text, original German.
Chemical composition — limit values
| Si | Mn | Mg | Cr | Zn | Ti | Al |
|---|---|---|---|---|---|---|
| 0,25 max | 0,80 | 4,50 | 0,20 | 0,25 max | 0,15 max | Rest |
Limit values in %.
Nominal wire analysis (Richtanalyse)
| Mn | Mg | Ti | Cr | Al |
|---|---|---|---|---|
| 0,80 | ~4,50 | 0,25 | 0,25 | R est |
Nominal wire analysis in %. Limit values and the nominal analysis are two different figures and are listed separately.
Mechanical properties of the weld metal
- 0.2% proof strength (Rp 0,2) 140 N/mm²
- Tensile strength (Rm) 300 N/mm²
- Elongation (A)(Lo=5do) 20%
- Maximum service temperature 80° C
- Tiefste Betr.temp -196° C
Indicative values.
Shielding gas and polarity
| Process | Shielding gas and polarity |
|---|---|
| WIG | (ISO 14175) I1 (~) |
| MSG | (ISO 14175) I1 (=+) |
Base materials
- Alu-Mg-Legierungen
- AlMg 5 3.3555 EN AW – 5019 [AlMg 5]
- AlMg 4,5 Mn 3.3547 EN AW – 5083 [AlMg 4,5 Mn 0,7]
- AlMg 4 Mn 3.3545 EN AW – 5086 [AlMg 4]
- AlMgSi 0,5 3.3206 EN AW – 6060 [AlMgSi]
- AlMgSi 0,7 3.3210 EN AW – 6005A [AlSiMg(A)]
- AlMgSi I 3.2315 EN AW – 6082 [AlSi I Mg Mn]
- AlMg I SiCu 3.3211 EN AW – 6061 [AlMg I SiCu ]
- AlZn 4,5 Mg I 3.4335 EN AW – 7020 [AlZn 4,5 Mg I]
- G-AlMg 5 3.3561 EN AC-51300
- G-AlMg 5 Si 3.3261 EN AC-51400
Available forms and packaging
- MIG: gespult auf D100 / D200 / K 200 / K 300
- WIG: verpackt in Karton a 10 kg
Spools: D100 D200 K200 K300
Spools listed for this product
| Spool | Outer diameter | Bore / inner diameter | Outer width | Wire weight |
|---|---|---|---|---|
| K300 (B300) | 300 mm | Inner diameter: 180 mm | 103 mm | 15–20 kg |
| D100 (S100) | 100 mm | Bore diameter: 16,5 mm | 45 mm | 0,5–1 kg |
| D200 (S200) | 200 mm | Bore diameter: 50,5 mm | 55 mm | 2–5 kg |
Approvals
The scope of each approval is set out in its document.
Documentation
Related DRATEC products
Products from the same category. Not a claim of technical interchangeability.
Request a quote
Send an enquiry for this product. Tell us the diameter and quantity and we will prepare a quote.