Classification: S Cu 6560 ER CuSi-A
Copper · S Cu 6560 ER CuSi-A
Send an enquiry for this product. Tell us the diameter and quantity and we will prepare a quote.
Standards and classifications
| EN ISO 24373 | S Cu 6560 (CuSi3Mn1) |
|---|---|
| AWS-A5.7 | ER CuSi-A |
Field of application
Joint welding of copper, copper-zinc alloys Surfacing on cast iron, as well as unalloyed and low-alloy steels MIG brazing of galvanised steel sheet, as well as higher-strength sheet MIG: recommended TIG: recommended GAS: unsuitable
Manufacturer's text, original German.
Chemical composition — limit values
| Cu | Fe | Mn | Si | Sn |
|---|---|---|---|---|
| Rest | 0,07 | 1,00 | 3,00 | 0,10 |
Limit values in %.
Nominal wire analysis (Richtanalyse)
| Cu | Sn | Si | Mn | Zn | Fe |
|---|---|---|---|---|---|
| Basis | 0,10 | 3,00 | 1,00 | 0,10 | 0,07 |
Nominal wire analysis in %. Limit values and the nominal analysis are two different figures and are listed separately.
Mechanical properties of the weld metal
- 0.2% proof strength (Rp0,2) 150 N/mm²
- Tensile strength (Rm) 390 N/mm²
- Elongation (A)(Lo=5do) 40 %
- Impact energy (Av) 60 J
- Brinell hardness 90
Indicative values.
Shielding gas and polarity
| Process | Shielding gas and polarity |
|---|---|
| WIG | (ISO 14175) I1 (=-) |
| MSG | (ISO 14175) I1 (=+) |
Base materials
- w.o.
Available forms and packaging
- MIG: gespult auf D100 / D200 / K 200 / K 300
- WIG: verpackt in Karton a 10kg
Spools: D100 D200 K200 K300
Spools listed for this product
| Spool | Outer diameter | Bore / inner diameter | Outer width | Wire weight |
|---|---|---|---|---|
| K300 (B300) | 300 mm | Inner diameter: 180 mm | 103 mm | 15–20 kg |
| D100 (S100) | 100 mm | Bore diameter: 16,5 mm | 45 mm | 0,5–1 kg |
| D200 (S200) | 200 mm | Bore diameter: 50,5 mm | 55 mm | 2–5 kg |
Documentation
Related DRATEC products
Products from the same category. Not a claim of technical interchangeability.
Request a quote
Send an enquiry for this product. Tell us the diameter and quantity and we will prepare a quote.