MIG (GMAW) wires
Product image not available.
DIN EN ISO: 14341-A G 50 7 M21 4Mo, 14341-B S4M31AWS: A5.28 ER80S-D2, A5.28 ER90S-D2
MIG (GMAW) wires for high strength structural steels (MnMo)
Send an enquiry for this item. State the quantity and the delivery deadline and we will prepare a quotation.
Characteristics and application
MIG/GMAW wire for welding of high strength steels, used predominantly after stress relieving. Predominantly used for welding high strength steels, providing a good combination of strength and toughness. May find use for joining creep resistance steels up to about 500°C.
Base materials
For a wide range of engineering steels with a yield strength up to 540MPa (78ksi) and tensile stregth up to 620MPa (90ksi).
S355NL-S460NL, S355ML-S460ML, S460QL-S550QL, P235GH-P355GH, 16Mo3, 15NiCuMoNb5-6-4
ASTM: A182 grade F36, A213 grade T36, A335 grade P36, A487 grades 2A/B/C
AISI: 4130
Classifications
| DIN EN ISO | 14341-A G 50 7 M21 4Mo, 14341-B S4M31 |
|---|---|
| AWS | A5.28 ER80S-D2, A5.28 ER90S-D2 |
Typical analysis in %
| C | Si | Mn | Mo |
|---|---|---|---|
| 0,09 | 0,70 | 1,95 | 0,50 |
Mechanical properties
| Yield strength (MPa) | ≥ 560 |
|---|---|
| Tensile strength (MPa) | ≥ 620 |
| Elongation (%) | 4d/5d: ≥18 |
| Charpy-V value (ISO-V, J) | RT ≥ 160 -70°C ≥ 47 |
Typical heat treatment
Welding procedure, including preheat temperature, interpass temperature and PWHT, will be dependent on the base material being welded and any applicable design codes.
Approvals
- CE
Documentation
Official Fliess publication for the programme as a whole, not for the individual item.
Related products
Related products from the Fliess programme, with the welding process. Not a claim of technical interchangeability.
Request a quotation
Send an enquiry for this item. State the quantity and the delivery deadline and we will prepare a quotation.