MIG (GMAW) wires
Product image not available.
DIN EN ISO: 14700 S Fe2Material no.: 1.8405
MIG (GMAW) wire for hardfacing
Send an enquiry for this item. State the quantity and the delivery deadline and we will prepare a quotation.
Characteristics and application
MIG/GMAW wire for hardfacing. The wire is used for applications requiring excellent impact resistance, or as a buffer layer prior to higher hardness deposits (eg. ED-A 60). The weld deposit has a nominal hardness of 350HB and can be machined using most standard milling, turning and cutting techniques.
Classifications
| DIN EN ISO | 14700 S Fe2 |
|---|---|
| Material no. | 1.8405 |
Typical analysis in %
| C | Mn | Cr |
|---|---|---|
| 0,7 | 2,0 | 1,0 |
Mechanical properties
| Hardness | 325-375 HB |
|---|
Typical heat treatment
Weld procedure requirements dependent on material being surfaced.
Documentation
Official Fliess publication for the programme as a whole, not for the individual item.
Request a quotation
Send an enquiry for this item. State the quantity and the delivery deadline and we will prepare a quotation.