MIG (GMAW) wires
Product image not available.
DIN EN ISO: 14700 S Fe8Material no.: 1.4718
MIG (GMAW) wire for hardfacing
Send an enquiry for this item. State the quantity and the delivery deadline and we will prepare a quotation.
Characteristics and application
MIG/GMAW wire for hardfacing. The wire is predominantly used for applications requiring good abrasion resisitance such as mixers, crushers and earth moving equipment but deposits will withstand moderate impact. With final deposit hardness being nominally 60HRC the weld metal can only be ground. If very thick build-ups are required it is suggested that lower hardness wires (eg. ED-A 35) be used as a buffer layer.
Classifications
| DIN EN ISO | 14700 S Fe8 |
|---|---|
| Material no. | 1.4718 |
Typical analysis in %
| C | Si | Mn | Cr |
|---|---|---|---|
| 0,45 | 3,00 | 0,40 | 9,50 |
Mechanical properties
| Hardness | 57-62 HRC |
|---|
Typical heat treatment
Weld procedure requirements dependent on material being surfaced.
Documentation
Official Fliess publication for the programme as a whole, not for the individual item.
Request a quotation
Send an enquiry for this item. State the quantity and the delivery deadline and we will prepare a quotation.