Designation: 522050A130
Step Controlled Transformer-Rectifier Technology for Demanding Applications
Price on request
Price and availability are provided by quotation. Send an enquiry with quantity and variant.
Key features
- Operates with 3 Phase 400V - 50/60Hz.
- Excellent welding characteristics with all types of solid and flux cored wires.
- Seperate Wire Feeding System for spools 300, 270 and 200 mm in diameters and special wire inlet for drums.
- Standard harness between wire feeder box and the base machine is 5m long. Upon request this could be extended up to 30m.
- The 4 Wheel drive system assures good feedability with longer torches and less deformation of delicate wires like aluminum and fluxcored wires.
- Welding voltage is adjusted from the front panel of the base machine and wire feed speeding is adjusted on the front panel of the wire feeder box. Welding voltage & current are monitored on the digital displays. Optimum welding parameters could be selected from the chart on the front panel of the wire feeder box.
- Soft Start for spatter free arc ignition, pre-gas and post-gas for automation, wire burn-back time for antisticking could be set inside the wire spool cabinet.
- Trigger latching (2/4) switch and manual wire feeding (inching) button for threading.
- For low spatter welding, according to the current range 2nd and 3rd work-piece outlets are provided.
- Protection Class is IP 21.
- Built-in trolly with gas bottle platform with 220V standard electric socket for CO2 gas heaters.
- Strong outer case made by 1.2 mm steel sheet and coated with electrostatic painting for a corrosion free longer service life.
- Fan cooled and thermally protected against overheating.
- Earth clamp, electric-line cable and gas bottle hose are included in the standard equipment.
Technical specifications
| Power Source | ||
| Mains Voltage (3Ph) | 400 | V |
| Input Power from Mains | 28.3 (%40) | kVA |
| Welding Current Range | 45 - 500 | A |
| Nominal Welding Current | 500 (%40) | A |
| Open Circuit Voltage | 19-53 | V |
| Voltage Adjustment Steps | 3 x 10 | |
| Dimensions (l x w x h) | 1020 x 590 x 1290 | mm |
| Protection Class | IP21 | |
| Wire Feeder System | ||
| Welding Wire Diameter | 0.80 - 2.00 | mm |
| Standard Roller Groove Size | 1.00 - 1.20 | mm |
| Wire Feeder Roller Diameter | 4x37 | mm |
| Wire Feeding Speed | 1 - 24 | m/min |
| Torch Trigger Control | 2 / 4 | |
| Spool Capacity | 20 | kg |
| Dimensions (l x w x h) | 560 x 225 x 450 | mm |
| Weight (Net) | 25 | kg |
Available configurations
| Code | Dimension |
|---|---|
| 522050A110 | RS 500 M-5 - |
| 522050A120 | RS 500M-10 - |
| 522050A130 | RS 500M-15 - |
Standard and optional equipment
| Code | Name | Dimension | Standard/Optional |
|---|---|---|---|
| 7907000002 | Gas Hose | 2 METRE | Standard |
| 7905407005 | EARTH CLAMP and CABLE | 70mm2/5mt (35 socket) | Standard |
| 7120040003 | LAVA MIG 40-3 | 340A (%60 CO2) - 3m | Optional |
| 7020009002 | CO2 GAS HEATER | MAGMAWELD (220V / 230V-75W) | Optional |
| 7020001005 | CO2 PRESSURE REGULATOR | W21,8x1/14'' Bottom Adjustment | Optional |
| 7020001004 | ARGON PRESSURE REGULATOR | G5/8'' Bottom Adjustment | Optional |
Documentation
Operating ManualPDFAdditional DocumentsPDFApprovals & CertificatesIMGApprovals & CertificatesIMGApprovals & CertificatesIMGOfficial Magmaweld product pageWEB
Documents open from the official Magmaweld pages (PDF).