Classification: S Ni 4060 NiCu7
Nickel-based · S Ni 4060 NiCu7
Send an enquiry for this product. Tell us the diameter and quantity and we will prepare a quote.
Standards and classifications
| EN ISO 18274 | SG – NiCu30Mn3Ti (S Ni 4060) |
|---|---|
| AWS A5.14 | ER NiCu7 |
Field of application
Joint welding of nickel-copper alloys, joints between copper alloys and steels (black-red joints) Cladding, buttering Welding of Monel 400 and 404
Manufacturer's text, original German.
Chemical composition — limit values
| Ni & Co | C | Si | Mn | Al | Cu | Fe | Ti |
|---|---|---|---|---|---|---|---|
| 65 | 0,15 | 1,25 | 3,5 | 1,25 | bal. | 2,5 | 2,0 |
Limit values in %.
Nominal wire analysis (Richtanalyse)
| C | Ni | Mn | Fe | Ti | Al | Si | Cu |
|---|---|---|---|---|---|---|---|
| 0,15 | 65 | 3,5 | 2,5 | 2 | 1,25 | 1,25 | bal |
Nominal wire analysis in %. Limit values and the nominal analysis are two different figures and are listed separately.
Mechanical properties of the weld metal
- 0.2% proof strength (Rp0,2) 300 N/mm²
- Tensile strength (Rm) 500 N/mm²
- Elongation (A)(Lo=5do) 35%
- Impact energy (Av) 120J
Indicative values.
Shielding gas and polarity
| Process | Shielding gas and polarity |
|---|---|
| WIG | (ISO 14175) I1 (=-) |
| MSG | (ISO 14175) I1 (=+) |
Base materials
- 2.4360 Monel 400 Monel 405
Available forms and packaging
- MIG: gespult auf D100 / D200 / K 200 / K 300
- WIG: verpackt in Karton a 5 kg
Spools: D100 D200 K200 K300
Spools listed for this product
| Spool | Outer diameter | Bore / inner diameter | Outer width | Wire weight |
|---|---|---|---|---|
| K300 (B300) | 300 mm | Inner diameter: 180 mm | 103 mm | 15–20 kg |
| D100 (S100) | 100 mm | Bore diameter: 16,5 mm | 45 mm | 0,5–1 kg |
| D200 (S200) | 200 mm | Bore diameter: 50,5 mm | 55 mm | 2–5 kg |
Approvals
| TÜV | X |
|---|
The scope of each approval is set out in its document.
Documentation
Related DRATEC products
Products from the same category. Not a claim of technical interchangeability.
Request a quote
Send an enquiry for this product. Tell us the diameter and quantity and we will prepare a quote.