Designation: 523550W230
Inverter Technology for Production
Price on request
Price and availability are provided by quotation. Send an enquiry with quantity and variant.
Key features
- Operates with 3 Phase 400V-50/60 Hz mains voltage and generators, tolerates voltage fluctuations up to 15%.
- Due to inverter technology, energy efficiency is higher than the conventional machines.
- Excellent welding characteristics with all types of solid and flux cored wires with CO2 or Mix gases.
- 4 Wheel Drive system, offers very powerful feedability for longer torches and offers less deformation on soft wires such as aluminum and flux cored wires.
- Welding voltage, wire feed speed (welding current) is adjusted from the panel in front of the wire feeder.
- Optimum welding parameters can be obtained from the printed table inside of the wire feed cabinet.
- Manual wire feeding & gas valve buttons, Trigger Mode (2/4), Spot mode are available on the wire feeder.
- Soft Start, Pre-gas, Post-gas, Crater Filling, Burn-Back, Flow Sensor settings are adjusted from the digital panel of the wire feeding system.
- ø300 mm, ø270 mm and ø200 mm spools and drums of any size can be used.
- 24V AC outlet for CO2 gas heater.
- Built in gas cylinder platform with large wheels to ease mobility in workshops.
- The Separate wire feeder standard harness length is 5 m and can be extended up to 30 m upon request (M-MW models).
- Protected against voltage fluctuations.
- Designed also for outdoor use, protection class is IP 23.
- Water cooling unit for water cooled torches provides powerful cooling even at very hot climates. (Water-cooled (W) models)
- Standard accessories come with the machine.
Technical specifications
| Power Source | ||
| Mains Voltage (3Ph) | 400 | V |
| Input Power from Mains | 31.8 (%40) | kVA |
| Power Source Efficiency | 85,23 | % |
| IDLE State Power Consumption | 23 | W |
| Welding Current Range | 50 - 500 | ADC |
| Nominal Welding Current | 500 (%40) | A |
| Open Circuit Voltage | 69 | VDC |
| Dimensions (l x w x h) | 1170x528x1430 | mm |
| Weight (Net) | 122 | kg |
| Protection Class | IP23 | |
| Wire Feeder System | ||
| Welding Wire Diameter | 0.80 - 2.4 | mm |
| Wire Feeding Speed | 1 - 24 | m/min |
| Torch Trigger Control | 2 / 4 | |
| Dimensions (l x w x h) | 584 x 235 x 553 | mm |
| Weight (Net) | 24 | kg |
| Water Cooling Unit | ||
| Cooling Power | 1.02 | kW |
| Dimensions (l x w x h) | 732 x 293 x 302 | mm |
| Weight (Net) | 24 | kg |
Available configurations
| Code | Dimension |
|---|---|
| 523550W110 | ID 500 MW-5 ECO - Closed Type W.Feeder |
| 523550W120 | ID 500 MW-10 ECO - Closed Type W.Feeder |
| 523550W130 | ID 500 MW-15 ECO - Closed Type W.Feeder |
| 523550W140 | ID 500 MW-20 ECO - Closed Type W.Feeder |
| 523550W210 | ID 500 MW-5 ECO - Open Type W.Feeder |
| 523550W220 | ID 500 MW-10 ECO - Open Type W.Feeder |
| 523550W230 | ID 500 MW-15 ECO - Open Type W.Feeder |
| 523550W240 | ID 500 MW-20 ECO - Open Type W.Feeder |
Standard and optional equipment
| Code | Name | Dimension | Standard/Optional |
|---|---|---|---|
| 7907000002 | Gas Hose | 2 METRE | Standard |
| 7905305005 | EARTH CLAMP and CABLE | 50mm2/5mt (35 socket) | Standard |
| 7120050003 | LAVA MIG 50W-3 | 500A (%100 CO2) - 3m | Optional |
| 7020009003 | CO2 GAS HEATER | MAGMAWELD (24V AC-50W) | Optional |
| 7020001005 | CO2 PRESSURE REGULATOR | W21,8x1/14'' Bottom Adjustment | Optional |
| 7020001004 | ARGON PRESSURE REGULATOR | G5/8'' Bottom Adjustment | Optional |
Documentation
Operating ManualPDFApprovals & CertificatesIMGApprovals & CertificatesIMGOfficial Magmaweld product pageWEB
Documents open from the official Magmaweld pages (PDF).