Non-copper coated and unalloyed GMA (MIG/MAG) wire electrode, especially produced for welding without spatter or very low level of spatter. Suitable for welding of general structural steels, boiler steels, pipe steels and cast steels. Due to it's special coating provides stable arc and no spatter especially with mixed shielding gases which can be used depending on the thickness. Generally preferred in robotic applications due to it's high welding performance without spatter and cleaning needs. Also provides cost advantages in cleaning after welding, torch spare part consumptions like, contact tip, spiral, driving wheel, anti-spatter sprey. Due to these advantages preferably used in automotive, machine and steel furniture production.
Standards and classifications
AWS/ASME SFA - 5.18
ER70S-6
EN ISO 14341 - A
G 46 4 C1 4Si1
EN ISO 14341 - A
G 46 4 M21 4Si1
TS EN ISO 14341 - A
G 46 4 M21 4Si1
TS EN ISO 14341 - A
G 46 4 C1 4Si1
DIN M. No.
1.5130
Base materials
EN
DIN
P235TR2 - P355T2
St 37.4 - St 52.4
S255N -S380N
StE 255 - StE 380
-
A, B, D, E
S185 - P355T1
St 33 -St 52.0
P235GH, P265GH
H I, H II
GE 200 - GE 240
GS-38, GS-45
P295GH, P355GH
17Mn4, 19Mn5
L210 - L360NB
StE 210.7 - StE 360.7
P235G1TH - P265G1TH
St 35.8 - St 45.8
S235JR - S355J0
St 37.2 - St 52.3
Typical chemical features of the welding wire
Type of Analysis
C
Si
Mn
Welding Wire
0.07
0.95
1.70
Typical mechanical values of weld metal
Test Condition
Protection Gas
Yield Strength (N/mm²)
Tensile Strength (N/mm²)
Elongation A5 (%)
Charpy V-Notch Properties (J)
As welded
C1
460
570
30
-40°C → 70
As welded
M21
480
580
27
-30°C → 95
-40°C → 80
-50°C → 65
Welding positions
PAPBPCPDPEPF (restricted)PG (restricted)
Polarity
DC(+)
Shielding gas
M20 M24 M26 M21 C1
Welding parameters and efficiency
Diameter (mm)
Current (A)
1.20
120-280
Variants and packaging
Product Code
Diameter (mm)
Weight Of The Box (kg)
Boxes Per Package
Weight Of The Package
Packaging Type
21030DJAM2
1.00
15.0
1
15.7
Wire Basket Spool (K300MS)
21030EJAM2
1.20
15.0
1
15.7
Wire Basket Spool (K300MS)
Storage and re-drying
Shouldn t be exposed to high statical load and impact.
