Classification: S Fe8 (EN 14700)
Gas metal arc (MIG/MAG) welding wire especially developed for hardfacing of parts subjected to high metal-to-metal friction, mineral abrasion and moderate impact.
Price and availability are provided by quotation. Send an enquiry with quantity and variant.
Product description
Gas metal arc (MIG/MAG) welding wire especially developed for hardfacing of parts subjected to high metal-to-metal friction, mineral abrasion and moderate impact. Weld metal can retain it's hardness at high temperatures, till 600°C. Weld metal can be grinded and machined by diamond tools. A tough buffer layer with FCW 30 is recommended before hardfacing, if base metal has high carbon and low weldability. Heat treatment after hardfacing will decrease as-welded hardness. Typical Applications: Ceramic tile moulds, mixer blades, crushers, earth moving equipments, hot cut-offs, shear blades, dies for pressure casting, scraper blades, conveyors, rollers.
Standards and classifications
| EN 14700 | S Fe8 |
| TS EN 14700 | S Fe8 |
| DIN 8555 | MSG 6-GZ-60-GPS |
| DIN M. No. | 1.4718 |
Typical chemical values of weld metal
| Type of Analysis | C | Si | Mn | Cr | Fe |
|---|---|---|---|---|---|
| Weld Deposit | 0.40 | 2.40 | 0.35 | 8.60 | 88.25 |
Typical mechanical values of weld metal
| Test Condition | Protection Gas | Hardness (HRc) |
|---|---|---|
| As welded | C1 | 59 |
| As welded | M21 | 58 |
Welding positions
Polarity
Shielding gas
Wear resistance
| Property | Level |
|---|---|
| Abrasion | Medium |
| Adhesion | High |
| Impact | Medium |
| Temperature | High |
| Corrosion | Medium |
Scale as published in the official Magmaweld chart: Low · Medium · High · Very High
Variants and packaging
| Product Code | Diameter (mm) | Weight Of The Box (kg) | Boxes Per Package | Weight Of The Package | Packaging Type |
|---|---|---|---|---|---|
| 28000DJAM2 | 1.00 | 15.0 | 1 | 15.7 | Wire Basket Spool (K300MS) |
| 28000EJAM2 | 1.20 | 15.0 | 1 | 15.7 | Wire Basket Spool (K300MS) |
| 28000GJBM2 | 1.60 | 15.0 | 1 | 15.7 | Wire Basket Spool (K300MS) |
Storage and re-drying
- Shouldn t be exposed to high statical load and impact.
Documentation
Documents open from the official Magmaweld pages (PDF).